(YOU DO NOT NEED TO REMOVE THE DOCK VINYL FOR INSTALLATION)

1. Start by laying the bumpers out to the desired spacing. It might be necessary to move the bumper right or left a few inches to accommodate all three straps through the dock.

2. For mounting on the face of the dock, it is not neccessary to remove the vinyl edging before mounting the bumpers, It's your option.

3. Place the bumper in the desired position. Place the middle strap of the bumper through the first spacing in the dock, feed it all the way through. Retrieve the strap from the under side of the dock. Lace the strap through the two D-rings and tighten as you would a motorcycle helmet keeping the D-rings close to the bottom of the bumper.

4. Repeat the process for the remaining straps.

5. Roll up excess strap and tuck behind the D-rings.

6. Push the bumper down to snug into position.